PCB decomposition and formation in thermal treatment plant equipment

In this study we investigated both the decomposition and unintentional formation of polychlorinated biphenyl congeners during combustion experiments of refuse-derived fuel (RDF) and automobile shredder residue (ASR) at several stages in thermal treatment plant equipment composed of a primary combustion chamber, a secondary combustion chamber, and other equipments for flue gas treatment. In both experiments, the unintentional formation of PCB occurred in the primary combustion chamber at the same time as the decomposition of PCB in input samples. By combusting RDF, non-ortho-PCB predominantly formed, whereas ortho-PCB and symmetric chlorinated biphenyls (e.g., #52/69, #87/108, and #151) tended to be decomposed. ASR formed the higher chlorinated biphenyls more than RDF. These by-products from ASR had no structural relation with ortho-chlorine. Lower chlorinated biphenyls appeared as predominant homologues at the final exit site, while all congeners from lower to higher chlorinated PCB were unintentionally formed as by-products in the primary combustion chamber. This result showed that the flue gas treatment equipments effectively removed higher chlorinated PCB. Input marker congeners of RDF were #11, #39, and #68, while those for ASR were #11, #101, #110/120, and #118. Otherwise, combustion marker congeners of RDF were #13/12, #35, #77, and #126, while those for ASR were #170, #194, #206, and #209. While the concentration of PCB increased significantly in the primary combustion chamber, the value of toxicity equivalency quantity for dioxin-like PCB decreased in the secondary combustion chamber and the flue gas treatment equipments.     

Evaluation of diffusive gradients in thin films technique (DGT) for measuring Al, Cd, Co, Cu, Mn, Ni, and Zn in Amazonian rivers

Studies concerning the lability and bioavailability of trace metals have played a prominent role in the search for contamination of water resources. This work describes the first application yet of the diffusive gradients in thin films technique (DGT) to the determination of the fraction of free plus labile metals in waters from the Amazon Basin. Due to the complexity of the use of DGT for samples with low ionic strength and high organic matter content (characteristic of Amazonian rivers), a new analytical procedure was developed. The method is based on the determinations of apparent diffusion coefficients (D_ap) in the laboratory, by performing deployments in samples collected in the corresponding sites of study. The D_ap thereby determined is then used for in situ measurements. The suitability of the proposed approach for determination of labile Al, Cd, Co, Cu, Mn, Ni, and Zn in the Amazon River and Rio Negro (English: Black River) was evaluated. Except for Co, Mn (in a deployment at Rio Negro), Ni and Zn (in a deployment at Amazon River), labile in situ measurements were lower or similar to dissolved concentrations, indicating suitability of the proposed approach.     

210Pb deposition in the far East Asia: controlling factors of its spatial and temporal variations

In order to better understand the behavior of ²¹⁰Pb deposition in Far East Asia, comprehensive data of monthly ²¹⁰Pb deposition, which includes several time-series and spatial distribution data at 14 stations in Japan and 2 stations in Taiwan, were analyzed. Pb-210 deposition at most of the sites exhibited a typical seasonal change with higher values in winter and lower values in summer; especially, the greatest ²¹⁰Pb deposition in the world occurred in winter at sites beside the Japan Sea. The deposition behavior of ²¹⁰Pb in Far East Asia differed between winter and summer. The meteorological phenomenon peculiar to winter of the Japan Sea side, i.e., formation of the Japan Sea convergence zone, might cause the high ²¹⁰Pb concentration in rainwater, as may heavy snowfall. The ²¹⁰Pb concentration in rainwater showed long-term variability, although this differed between winter and summer. This long-term variability may be related to climatological factors such as El Niño.     

Age-Dependent Factors Affecting Thoracic Response: A Finite Element Study Focused on Japanese Elderly Occupants

Objectives: The ultimate goal of this research is to reduce thoracic injuries due to traffic crashes, especially in the elderly. The specific objective is to develop and validate a full-body finite element model under 2 distinct settings that account for factors relevant for thoracic fragility of elderly: one setting representative of an average size male and one representative of an average size Japanese elderly male.

Methods: A new thorax finite element model was developed from medical images of a 71-year-old average Japanese male elderly size (161cm, 60 kg) postmortem human subject (PMHS). The model was validated at component and assembled levels against original series of published test data obtained from the same elderly specimen. The model was completed with extremities and head of a model previously developed. The rib cage and the thoracic flesh materials were assigned age-dependent properties and the model geometry was scaled up to simulate a 50th percentile male. Thereafter, the model was validated against existing biomechanical data for younger and elderly subjects, including hub-to-thorax impacts and frontal impact sled PMHS test data. Finally, a parametric study was conducted with the new models to understand the effect of size and aging factors on thoracic response and risk of rib fractures.

Results: The model behaved in agreement with tabletop test experiments in intact, denuded, and eviscerated tissue conditions. In frontal impact sled conditions, the model showed good 3-dimensional head and spine kinematics, as well as rib cage multipoint deflections. When properties representative of an aging person were simulated, both the rib cage deformation and the predicted number of rib fractures increased. The effects of age factors such as rib cortical thickness, mechanical properties, and failure thresholds on the model responses were consistent with the literature. Aged and thereby softened flesh reduced load transfer between ribs; the coupling of the rib cage was reduced. Aged costal cartilage increased the severity of the diagonal belt loading sustained by the lower loaded rib cage.

Conclusions: When age-specific parameters were implemented in a finite element (FE) model of the thorax, the rib cage kinematics and thorax injury risk increased. When the effect of size was isolated, 2 factors, in addition to rib material properties, were found to be important: flesh and costal cartilage properties. These 2 were identified to affect rib cage deformation mechanisms and may potentially increase the risk of rib fractures.     

Behavior of PCNs, PCDDs, PCDFs, and dioxin-like PCBs in the thermal destruction of wastes containing PCNs

In the first known study to characterize the emissions of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dl-PCBs) from the thermal treatment of wastes containing PCNs, the formation and decomposition behavior of these pollutants was investigated both at laboratory scale and at plant scale. Exhaust gas measurements from laboratory-scale combustion of rubber belts containing PCNs (FB belts) were used as the basis for calculations predicting that the incremental dioxin toxic equivalency (TEQ) emissions from municipal solid waste (MSW) incinerators would be less than 0.1 ng/m3 N. In order to directly examine co-incineration of FB belts with MSW and to address potential differences between the laboratory experiment and full-scale MSW incinerators, experiments were conducted using a larger scale thermal treatment test facility with sampling and analysis at several points in the thermal treatment process. Congener specific analysis of PCNs clearly showed that both destruction and synthesis simultaneously occurred during combustion in the kiln. Most of the PCNs were destroyed by secondary combustion, and almost all PCNs were removed after flue gas treatment. Almost all PCDDs/DFs were synthesized as by-products of kiln combustion, most of them were destroyed by the secondary combustion, and almost all dioxins (PCDDs/DFs and dl-PCBs) were removed after flue gas treatment. The TEQ emission levels were less than 0.1 ng/m3 N for all plant-scale tests, and differences in TEQ emission levels were very small. Adding wastes containing PCNs to MSW will not influence thermal treatment emissions to the environment from modern solid waste incinerators.     

Improved method for the formation of recycled resins from depolymerized products of waste fiber-reinforced plastics: simple and effective purification of recovered monomers by washing with water

The synthesis of recycled plastics from recovered monomeric materials obtained from the depolymerization reaction of fiber-reinforced plastics (FRP) was examined. The depolymerization reaction of FRP in the presence of N,N-dimethylaminopyridine (DMAP) smoothly yielded the corresponding monomers, which mainly consisted of dimethyl phthalates. The polymerization reaction with this monomer failed to form the corresponding unsaturated polyesters due to contamination by N-methyl-4-pyridone, a decomposition product of DMAP. An efficient purification of the recovered monomer was achieved by washing with water, and the purified monomer successfully yielded the corresponding polymers. A hardness test revealed that the polymers were as hard as the polyester made from virgin materials. The present modification provides a practical method for the preparation of recycled plastics from depolymerized plastics.     

Effects of dietary habits and CYP1A1 polymorphisms on blood dioxin concentrations in Japanese men

The major source of dioxin impurities in Japan in the past was agrochemical formulations; more recently, it has been exhaust from waste incinerators. To examine the environmental and genetic factors that influence blood dioxin concentration, we investigated the relationship among dioxin concentrations, dietary habits and cytochorome P450 1A1 (CYP1A1) polymorphisms (MspI type and Ile-Val type) in Japanese fishermen and farmers, including also a group of office workers as controls. The mean dioxin concentrations in the fishermen, the farmers and the controls were 161369, 79079 and 100500 pg/g fat, respectively. The elevated dioxin concentration with polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar-PCBs found in the fishermen may be due to the frequent consumption of fish; no such relationship was found both in the farmers and the controls. We found that the concentrations of congeners found as impurities in certain chemicals such as those previously used in agriculture showed no significant differences among the three groups; we consider it unlikely that the farmers would be directly exposed to dioxins from such chemicals. Thus, it is probable that the primary route of dioxin exposure in the Japanese population is through the food chain via fish consumption, regardless of occupation. No meaningful relationship between blood dioxin concentration and CYP1A1 polymorphisms was found in this study, although there was a significant difference between the concentration of total non-ortho-PCBs in genotypes A and B. Further studies on more subjects, including those of genotype C, are needed to confirm the relationship between blood dioxin concentrations and MspI polymorphisms.     

Seasonal variation of 228Ra/226Ra ratio in seaweed: implications for water circulation patterns in coastal areas of the Noto Peninsula, Japan

To examine water circulation patterns of coastal water, 72 seaweed (Sargasso) samples and 27 coastal water samples were collected from coastal areas of the Noto Peninsula, Japan, during the period from December 1998 to June 2002. The (228)Ra and (226)Ra activities of those samples were measured by low-background gamma-ray spectrometry. There was a wide range of activities of (228)Ra (0.5-2Bq/kg-fresh) and (226)Ra (0.5-1.2Bq/kg-fresh) in the Sargasso samples. The (228)Ra/(226)Ra activity ratio of Sargasso samples exhibited seasonal variation with minimum values in June ((228)Ra/(226)Ra= approximately 1) and maximum values in December (1.5-2.5), which was mainly governed by changes in (228)Ra activity. It is also notable that the seasonal variation of the (228)Ra/(226)Ra ratio of Sargasso is in approximate agreement with that of the ambient coastal water. Sargasso samples appear to have retained the (228)Ra/(226)Ra ratio of the ambient coastal waters, and the temporal variations in that ratio provide insight into seasonal changes in water circulation in the Noto Peninsula coastal area.